Introduction
Turf refers to parts of freshly cut grass with layers of soil and transplanting on another lawn. The lawn could have some grass or start from scratch to continue turf growth. Like an outdoor grass carpet, the pieces of turf are patched together to facilitate a new layer of grass from the seeds introduced. This preparation is a process that goes step by step if it has to succeed. In this article, that step by step preparation of turf laying will be explained accordingly.
Turf laying preparation process
Clearing away any plants, weeds, and debris:
The bare ground on which the turf will be laid should be cleared. All the weeds, possible plants, stones, and debris are supposed to be eradicated. This should be done in two phases, where the first one aims and the immediate removal of waste and clearing of the field. The next phase is a repeat of clearing to avoid mistakes when preparing the lawn.
Digging and renovating soil to at least 15cm deep:
The measurements of 15cm deep digging are significant because the cut grass seeds have also been measured. The purpose of this 15 cm digging is to renovate soil for properly laying the pieces of grass seeds that have to be transplanted.
Improving soil texture or quality if necessary:
There are many ways of achieving this step, which is necessary in most cases. Improving the structure of the soil is meant to refine the particles and make them tiny. In this way, they become better and will be compatible with the layers of grass that will be patched on top. A lake can be used as a farm tool, and the process may take time. However, the time spent on improving soil texture depends on the size of the lawn being prepared.
Level the area:
Once the soil structure has been improved, the next step is to level the ground. Although most people assume that this process does not need to be accurate, the truth remains that it determines the outcomes of the lawn after the whole process is complete. It will be measured to determine whether the lawn is proportional or not.
Firm the soil:
Landscaping cannot be completed without firming the soil. After improving the structure of the soil and levelling the area, it becomes possible to firm the soil. Flat boards can be used to evenly firm the soil as force is inserted to make the process effective.
Add the pre-turf fertilizer:
After the lawn has been firmed and evenly levelled, it is time to make it fertile. The pre-turn fertilizer is distributed accordingly, but the measure depends on the size of the lawn.
Raking and levelling again:
After the fertilizer has been distributed evenly, raking and levelling are done again. After the first levelling, firming was done, and the process is repeated. It is done as the last step before laying turf to ensure the lawn is done correctly.
Laying your turf:
This is the final step of the process of laying turf. It is carefully done to match the lawn with the cut patches. Since levelling and fertilizer were done already, the turf is laid carefully, and the growth of the grass can continue. You can go ahead and start watering as the process is now completed.
Conclusion
In conclusion, this process must be done step by step to avoid missing anything. The above article has been instrumental in explaining all the steps involved in turf laying.
No responses yet